POWERX Transparent USB 3.1 to Ngff SSD Enclosure

Built for

GAMER
Cuts load screens in gaming rigs with M.2 slots
PRO
Instant boots and fast project files in workstations
BUILDER
Standard M.2 mounting: no cables, one screw

Product details

This transparent polycarbonate enclosure turns M.2 NGFF (SATA) SSDs into fast external storage over both USB-A (USB 3.1) and Type-C Gen 2, with transfers up to 5gbps.

It takes M.2 sticks up to 2TB, needs no tools or drivers, and the pocketable 109 × 32 × 12 mm shell shows the drive inside. Power draw stays at 4.5W active and 0.5W idle.

Specifications

Key specs

Fits: M.2 NGFF
USB version: USB 3.1
Body: Transparent

Capacity & memory

Capacity: Supports up to 2TB

Physical

Material: Transparent polycarbonate
Dimensions: 109 × 32 × 12 mm

Compatibility & power

Interface: USB-A (USB 3.1) and Type-C Gen 2

Downloads & documentation

No drivers neededRecognised natively by Windows and Linux

Warranty termsYour invoice is the warranty card

Product FAQ

Will this fit my laptop or mini PC?

Check your slot type first: this drive uses the M.2 form factor listed in the specifications above (2242 or 2280). Most laptops and mini PCs accept 2280; compact and embedded devices often need 2242.

NVMe vs SATA: which do I have?

NVMe drives use the PCIe lanes on an M.2 slot and are several times faster than SATA. If your board’s M.2 slot is SATA-only, choose an M.2 SATA (NGFF) drive instead. The keying differs.

Do I need to install drivers?

No. Windows 10/11, Linux and Chrome OS recognise the drive natively. Initialise it in Disk Management (Windows) on first boot.

Is this genuine PowerX stock?

Yes. Every SKU ships from our own verified inventory with a PowerX warranty card inside.

Goes with your SSD